Include

Remote ControlInclude BatteryEnglish ManualKeychain

How to program

1. Press and hold the A and B buttons of the remote control at the same time, then release the B button (the A button stays still), press the B button 4 times, the LED flashes red quickly2. Release the two buttons. Now the LED of the remote control flashes quickly every 2 seconds.3. Put the original remote control in front of the remote control, the distance is about 2-3 cm4. Long press the button to be copied on the original remote control until the indicator light of the remote control changes5. When the LED light changes, press the corresponding button to be stored, the remote control copy is successful (repeat the steps for other buttons)6. If your remote control is a rolling code, you need to program the remote control with your receiver (use the fixed code directly)note:If the same button is copied from a different brand of remote control (or a different original remote control button is copied), it will automatically overwrite the code