Single chip microcomputer ,TTL turn RS485 module, 485 turn UART serial port, Level transfers, Hardware automatic flow controlOnly one in the whole network, 3.3V and 5.0V power supply, RS485 signal perfectly compatible with automatic flow control module.Has RXD, TXD signal indicator light, monitor send and receive statusUsing the standard 2.54 pitch design, easy secondary development.Colour:blueMaterial:metalOperating Temperature: -40 Degrees Celsius ~ + 85 Degrees Celsius.Size:42.8mm x 15.22mm x 0.8mm.Absolute adopts imported chip, industrial design, strong anti-interference ability, at the same time more effective lightning-protection design, 485 can be used in industrial field and field under the harsh environment. (Using 850 meters with 2 x 1.5 cable to do the test, it is recommended to be used within the 800 meters, more than 800 m, please add extra repeaters).Use half hole process design, thickness of 0.8 mm, can be used easily as a child motherboard, also can be used welding terminals.With 120 European match resistance, can make short sub R0 can match resistance, proposed the short answer the long distance transport.Support multiple machine communications, allowed to take in up to 128 devices on the bus.This module can be hot plug, there will be no other 485 chip hotplug phenomenon of signal switch to death.Large area laying copper, preventing signal interference.Package Content: 2 x TTL To RS485 AdapterOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.