3000W 4000W 5000W Solar Hybrid Charger Inverter 220V Inbuilt MPPT 60A 80A Charge Lead Acide Lithium Battery Off Grid Inverter
HF系列是一种新型的多合一混合式太阳能充电逆变器,它集成了太阳能存储和充电能量存储以及交流正弦波输出的功能.得益于DSP控制和先进的控制算法,它具有较高的响应速度,较高的可靠性和较高的工业标准.四种充电模式是可选的,即仅太阳能,市电优先,太阳能优先以及市电和太阳能混合充电;提供两种输出模式,即逆变器和市电,以满足不同的应用需求.
1.全数字电压和电流双闭环控制,先进的SPWM技术,输出正弦波.
2. Two output modes: mains bypass and inverter output; uninterrupted power supply.
3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
4. Advanced MPPT technology with an efficiency of 99.9%.
5. Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6. ON/OFF rocker switch for AC output control.
7. Power saving mode available to reduce no-load loss.
8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9. Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
10. 360 ° all-round protection with a number of protection functions.
11. Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
Models |
HF4830S60 |
HF4840S60 |
HF4850S80 |
HF4825U60 |
HF4830U60 |
HF4835U80 |
||
Mains mode |
||||||||
Rated input voltage |
220/230Vac |
110/120Vac |
||||||
Input voltage range |
(170Vac~280Vac) ±2% (90Vac-280Vac) ±2% |
(90Vac~140Vac) ±2% |
||||||
Frequency |
50Hz/ 60Hz (Auto detection) |
|||||||
Frequency Range |
47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz); |
|||||||
Overload/short circuit protection |
Circuit breaker |
|||||||
Efficiency |
>95% |
|||||||
Conversion time (bypass and inverter) |
10ms (typical) |
|||||||
AC reverse protection |
Available |
|||||||
Maximum bypass overload current |
40A |
|||||||
Inverter mode |
||||||||
Output voltage waveform |
Pure sine wave |
|||||||
Rated output power (VA) |
3000 |
4000 |
5000 |
2500 |
3000 |
3500 |
||
Rated output power (W) |
3000 |
4000 |
5000 |
2500 |
3000 |
3500 |
||
Power factor |
1 |
|||||||
Rated output voltage (Vac) |
230Vac |
120Vac |
||||||
Output voltage error |
±5% |
|||||||
Output frequency range (Hz) |
50Hz ± 0.3Hz 60Hz ± 0.3Hz |
|||||||
Efficiency |
>90% |
|||||||
Overload protection
|
(102% < load <125%) ±10%: report error and turn off the output after 5 minutes; (125% < load < 150%) ± 10%: report error and turn off the output after 10 seconds; Load >150% ±10%: report error and turn off the output after 5 seconds; |
(102% < load <110%) ±10%: report error and turn off the output after 5 minutes; (110% < load < 125%) ± 10%: report error and turn off the output after 10 seconds; (Load >150% ±10%): report error and turn off the output after 5 seconds; |
||||||
Peak power |
6000VA |
8000VA |
10000VA |
5000VA |
6000VA |
7000VA |
||
Loaded motor capability
|
2HP |
3HP |
4HP |
1HP |
1HP |
2HP |
||
Output short circuit protection |
Circuit breaker |
|||||||
Bypass breaker specifications |
40A |
|||||||
Rated battery input voltage |
48V (Minimum starting voltage 44V) |
|||||||
Battery voltage range |
Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery... settable on LCD screen) |
|||||||
Power saving mode |
Load ≤25W |
|||||||
Mains charging |
||||||||
Battery type |
Lead acid or lithium battery |
|||||||
Maximum charge current |
60A |
30A |
||||||
Charge current error |
± 5Adc |
|||||||
Charge voltage range |
40 –58Vdc |
40 –60Vdc |
||||||
Short circuit protection |
Circuit breaker and blown fuse |
|||||||
Circuit breaker specifications |
40A |
|||||||
Overcharge protection |
Alarm and turn off charging after 1 minute |
|||||||
PV charging |
||||||||
Maximum PV open circuit voltage |
145Vdc |
|||||||
PV operating voltage range |
60-145Vdc |
|||||||
MPPT voltage range |
60-115Vdc |
|||||||
Battery voltage range |
40-60Vdc |
|||||||
Maximum output power |
3200W |
4200W |
3200W |
4200W |
||||
PV charging current range (can be set) |
0-60A |
0-80A |
0-60A |
0-80A |
||||
Charging short circuit protection |
Blown fuse |
|||||||
Wiring protection |
Reverse polarity protection |
|||||||
Certified specifications |
||||||||
Certification |
CE(EN62040-1) |
|||||||
EMC certification level |
EN62040-2, C2 |
|||||||
Operating temperature range |
-15°C to 55°C |
|||||||
Storage temperature range |
-25°C ~ 60°C |
|||||||
Humidity range |
5% to 95% (Conformal coating protection) |
|||||||
Noise |
≤60dB |
|||||||
Heat dissipation |
Forced air cooling, variable speed of fan |
|||||||
Communication interface |
USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control |
|||||||
Size (L*W*D) |
430mm*338mm*126mm |
|||||||
Weight (kg) |
11 |
The figure below shows the system application scenario of this product. A complete system consists of the following parts:
1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.
2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.
3.电池:用于确保在太阳能不足且未连接主电源时为系统负载提供正常的电源.
4.家用负载:允许连接各种家用和办公室负载,包括冰箱,灯,电视,风扇和空调.
5.多合一太阳能充电逆变器:整个系统的能量转换单元.
具体的系统接线方法取决于实际应用场景.
Certification : CE
Origin : Mainland China