The two-channel multi-function intelligent wireless controller designed and manufactured by our company outputs two-channel passive switching signals. The output mode can be set to ,jog, interlocking, self-locking and one-channel inching and one-channel self-locking, which can replace various manually controlled switches.It is mainly used in electric doors, Windows, lifting equipment, gateways, lifters, industrial control and security industries.With the characteristics of high confidentiality, stable performance and low power consumption, it does not need to adopt traditional jumper or dial code switch coding, and can be used with remote control through code learning.

Technical parameters:

1. Working voltage:  DC12V ±10%

2. Standby current: ≤10mA

3. Working current: 70mA (power supply above 500mA is recommended)

4. Working frequency: 315MHz/433.92MHZ

5. Code types: fixed code and learning code

6. Receiving sensitivity: -105dbm

7.Output working way:2 passive switches,jog, interlocking, self-locking, and one  jog and one self-locking can be set by themselves (jog/Non-Latched .inter-lock/Latched .self-lock /Self-Latched )

8. Load suggestion: within 90W DC and 600W AC;Motor pump type inductive load half, and not suitable for frequent start and stop

9. Operating temperature: -10℃~70℃

10. Size of circuit board: 68*48*19mm

11. Shell size: 75*55*28mm

 Function parsing

1)  jog  mode: 1, 2, 3, 4 No connected

2) self-locking mode: 1+ 2; 3+4  connected

3) interlock mode: 1+ 2  connected; 3,4 No  connected

4) jog+self-locking mode: 1 ,2  NO connected, 3+4 connected

Learning methods:

When the receiver is powered on, press the code button on the receiver.indicator, Indicator light on, enter the Learn code state:Press the remote control button corresponding to the first line in turn,Corresponding to the second remote control button,And as the main button of the remote control (If it is a remote control with two keys, press the key for code on the receiver board to exit the study after pressing the first two keys.)

Clearing Code:

Keeping press the learning button 8 seconds until the LED indicator ON, It mean the code have been cleared successfully.

Note:We default send 315Mhz, if you need 433Mhz, pls leave a message under your order, thanks!

pacote inclued:

A:

1x Receiver(with cover)

B:

1 x Receiver(with cover)

1x Transmitter(with battery)

C:

1x Receiver(with cover)

2x Transmitter(with battery)

D:

1x Receiver(with cover)

3x Transmitter(with battery)

E:

1x Receiver(with cover)

4x Transmitter(with battery)