Function:

BF-D110A single-channel temperature controller, with two operating modes of heating and cooling, is widely used in the heating control of energy saving and environmental protection systems, and all kinds of system control that requires production orders. The D110A is designed for standard industrial guide rail suitable for rapid installation, which can be easily installed on the standard guide rail of electric control box. Compact and compact, it is very suitable for occasions with strict space restrictions.Using 10K NTC thermistor temperature measurement, and can be extended to 100 meters long distance temperature measurement, temperature measurement accuracy. Wide field power supply design, able to work adaptively between AC80V~240V power supply, stable, reliable and durable.

Main function

• one road 10K NTC temperature sensor on the input road normally open and normally closed point output
• temperature display
• Heating mode, cooling mode cutting mode
• compressor delay protection
• temperature measurement deviation correction
• Power off memory protection

Technical parameters:

Packing list: 1 main engine 2.NTC(10K temperature sensing line 1 3 instruction manual

Appearance size (mm) : length 91x width 40x height 52

Installation and size (mm) : the controller can be installed with standard DIN guide rail or fixed installation, the distance between the two fixed holes is 84 mm

Net weight: 0.152Kg gross weight: 0.201Kg

Working power and consumption power: AC(90-250w, 2W

Operating environment: -10℃~50℃

Display mode: three-digit LED digital display

Button: press the membrane button

Input: first (10K)NTC thermistor temperature sensor input, measuring range -50℃~ 120℃

Output: 1. One way relay normally open and normally closed contact heating and cooling output

The output contact current capacity is 5 amperes for resistive load and 1 amperes for inductive load.It can control electric heat of 1000w or motor or pump of 200W.

Measuring range: -50℃~120℃

Setting range: minimum limit :-45℃~ control temperature, maximum limit: control temperature ~110℃

Control range: -45~110℃

Other parameters: 1. Temperature sensing wire can be connected to 100 meters with ordinary wire for a long distance

2. Set parameters to maintain long-term memory after power failure

3 the temperature control return difference is between 1 ℃ and 30℃

4. Delay time: 0~5

5. Deviation correction :-15~15℃

Installation precautions

The temperature sensor is prone to damage when it encounters water, so please insert [sensor probe] into [waterproof blind tube] to ensure that the seal is watertight.

Do not put [sensors] directly into water to measure temperature.)

please do not put the temperature sensor transmission line and the 220V high-voltage wire in the same wire slot (tube), so as to avoid interference of strong electricity on the controller.

Temperature sensor can be extended using two core electrical wire.Output load: resistive load has 220V/5A: inductive load 220V/1A.

'