Description

Breathable Adjustable Wheelchair Headrest Pillow Neck Pillow Heightened Wheelchair Accessories Elderly Health Care Supplies Specification: Product Type: Wheelchair Headrest Color: Black, Red, Purple Material: aluminum alloy, mesh cloth, sponge Size: As shown Features: 1. Aluminum alloy material + breathable mesh + sponge. 2. But for 16"-20" seat width wheelchair or commode chair (there is no single universal headrest on the market that can be installed on wheelchair or commode chair). 3. The angle of the headrest and the height of the headrest can be adjusted according to the actual situation of the user (the high-back wheelchair can only adjust the height of the headrest, but cannot adjust the front and rear angle of the head) Instructions for use:     Put the curved base into the left and right pusher tubes of the wheelchair, insert the U-shaped slot base into the left and right sides of the curved base, adjust the width to fit the size of the headrest tube, and insert the headrest tube until the elastic When the beads jump out, turn the U-shaped card slot base to adjust the front and rear positions of the headrest. After determining the position, lock the knob with the arc-shaped base and the knob of the U-shaped card slot base; move the headrest up and down to a suitable height. Skills for use:     Directly press the pop-up on the headrest tube, pull out the headrest, without removing the U-shaped and curved base, the wheelchair can be folded directly. Scope of application:     The diameter of the wheelchair or toilet seat pusher tube must be 22.2-24.5 mm, and it is best to be a round tube, not a square tube, and a flat tube cannot be installed. There is a space of about 5CM in length to install a fixing clip; the seat width is between 16 inches and 20 inches, that is, the distance between the push handles on both sides is between 40 and 50CM; for electric wheelchairs, please pay special attention to whether they meet the push handle requirements!