Description
CP2102 chip integrated high, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), support the full function of the modem signal, without any external USB devices. CP2102 and other USB-UART switching circuit works similar to the driver through the PC's USB port virtual COM port to achieve the purpose of expansion.
Product Features:
1.PCB size: 26.5mm * 15.6mm
2. Using the new chip CP2102
3. With self-recovery fuse, in the event of an unexpected short circuit, can effectively protect your downloader and computer USB port
4. With three lights: power indicator, data receiving indicator, data transmission indicator, working status at a glance
5. With 3.3V and 5V voltage two power output
6. Lead all useful pins
7. With reset signal output
8. Supported operating systems: Windows 98/Me/2000/XP/7, MAC OS-9, MAC OS, X-Windows CE, Linux 2.40 or later
CP2102 chip features:
1. Includes USB transceiver, no external circuit breaker
2. Contains the clock circuit, no external circuit
3. Includes power-on reset circuit
4. On-chip voltage regulation can output 3.3V voltage
5. Meet the requirements of USB2.0 specification
6. The SUSPEND pin supports USB status pending
7. The asynchronous serial data bus is compatible with all handshaking and modulation regulator interface signals
8. Supported data formats are data bits 8, stop bits 1 and 2, and parity bits
9. Contains 512 bytes of receive buffer and 512 bytes of transmit buffer
10. Support hardware or X-ON / X-OFF
