12 v 10 road learning remote control switch using 10 10 a relay, each relay with matching learning remote control button, can be matched with 10 single bond remote control or with a 10 key remote control. Each way to work independently, each other, there is another way to work, switch button and three working indicator light.   red light(jog) , yellow light (self-locking), green (inter-lock).Mainly used in lamps and lanterns, LED control, electric door, window, hoisting equipment,  advanced, industrial control and security industry and other fields

Working voltage: DC12V

Working frequency: 315 MHZ or 433 MHZ (optional) 

Receiving sensitivity: - 110 DBMWorks mode: jog, self-locking, inter-locking (adjusted by mode  button)size: 135 * 73 * 18 mm

work modejog--press mode button , to the red light onself-lock--press mode button  , to the yellow lights onInter-lock  -press mode button , to the green light on

Output working way:Jog/Momentary---- press one button is ON . loosen your  finger on the same button is  OFF  .(need one channel switch  and one buttons remote control )Self -lock/Toggle ----- press one button for one time is  ON  .press the same button again is  OFF  .need one channel  switch and one buttons remote controlInter-lock/Latched ------- press one button is   ON , press another button is  OFF  . (need one channel switch and 2 buttons remote control

Learning and remove method1. press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully .2. remove/clean :press the learning button about 8 seconds , the indicator turn on to off , it means the information that you keep have been removed successfully .

A:

1 x Transmitter(with battery)