DC 12V 433M RF Wireless Receiver Learning Code Relay For EV1527 PT2262 ASK OOK Remote Control For LED Lighting

Category : Home Improvement | Electrical Equipment & Supplies

USD 5.68USD 5.98

DC 12V 433M RF Wireless Receiver Learning Code Relay For EV1527 PT2262 ASK OOK Remote Control For LED Lighting

Description
Specification

Description

Product Name : DC 12V 433M RF Wireless Receiver Learning Code Relay For EV1527 PT2262 ASK OOK Remote Control For LED Lighting

Packing list:

1 PCS DC 12V 433M RF Wireless Receiver Learning code Relay

Technical indicators:

operating voltage : DC 12V;

Operating frequency : 433.92MHz ;

Receiver sensitivity :-95dB;

Encoding: Receiver Recording;

Momentary / Latch / Toggle selectable (defult is Momentary , Latch Mode need 2 buttons handsender );

Learning function (can works with EV1527 and PT2262 remote(Click here), can store 16 pcs different code remote );

PCB Size:41×20×15mm;

Max load : 500W;

Advantage :

1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;

Relay mode :

Normally close (NC ) ;

Normally open (NO ) ;

Normally-open (NO) contacts connect the circuit when the relay is activated; the circuit is disconnected when the relay is inactive. It is also called a Form A contact or ''make'' contact. NO contacts may also be distinguished as ''early-make'' or NOEM, which means that the contacts close before the button or switch is fully engaged.
Normally-closed (NC) contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. It is also called a Form B contact or ''break'' contact. NC contacts may also be distinguished as ''late-break'' or NCLB, which means that the contacts stay closed until the button or switch is fully disengaged.

Learning method and steps:

1 Press the learning button and LED on the receiver will light up, enter the learning state.

2 Press the key you want to learn on remote control within 2-5 seconds , LED flash 3 times and then turn off , then it have success in learning .

Clear the deposit information

Keep Pressing Learning Key , LED turns on , Wait 8-10 Seconds , LED turn off , that deposited information has been successfully cleared ;

Work mode (programmable ):

singnal Non-locking (Momentary is defult )

singnal Self-locking (Toggle)

singnal Inter-locking (Latch)

Work Mode can be adjustable by jumper,Please operation under power off

Work mode explanation:

Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;

Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;

Latched------------------

Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.

Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.

Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF

Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.

Specification

Power Source : DC

Voltage : 12V

Origin : Mainland China

Brand Name : eletechsup

Protect Feature : Sealed

is_customized : Yes

Model Number : AK029

Usage : General Purpose

Theory : Electromagnetic Relay

Contact Load : High Power

Size : Miniature

Certification : NONE

DC 12V 433M RF Wireless Receiver Learning Code Relay For EV1527 PT2262 ASK OOK Remote Control For LED Lighting

Description

Specification

RELATED PRODUCTS