Description

DC 5V 12V 24V Time Relay 8 Channels 433.92M EV1527 Learning Code OOK ASK RC Multi-function Wireless Controller Module Kit

Product selling point:

1: Wide range of applications

2: 8-channel multi-function 433M wireless controller, each channel triggers independent delay independently without interfering with each other

3: 4 functional modes: non-latching (instantaneous); delay (2/10/60/600/3600 seconds); self-locking (switching); interlocking (Latch), the function mode and delay time are selected by the pad.

4: Low pulse trigger (connect to power GND through trigger button or control low level through MCU IO port)

5: Simple to use

Product Specifications:

Working voltage: DC 12V/24V (5V optional)

working current (DC 12V): standby current 11MA, 1 relay on 37MA, 2 relays on 64MA, 3 relays on 88MA, 4 relays on 110MA, 5 relays on 131MA, 6 relays on 151MA, 7 relays on Relays open 170MA, 8 relays open 187MA

''Instantaneous''''Self-locking''''Interlocking''''Delayed'' Four functional modes

Decoding type: fixed code, can be adapted to up to 32 remote controls

Remote control type: Compatible

EV1527 6 Working distance: 100 meters (wireless receiving sensitivity: -108dbm)

Input control pin 8, 5V TTL level, NPN trigger, 0.2-2 seconds low pulse

Dimensions: 99 x 62 x 20 mm

Weight: 118.6g

Relay maximum load capacity: DC 1-110V/5A; AC 85-265V/6A

Adapter Remote Control (Learning Remote Control):

In normal working mode, the LED is always on, and when a valid remote control key value is received, the LED flashes.

Clear code: long press the button, the LED goes out. After about 5 seconds, the LED will be on, and the code clearing is completed (Note: After the code clearing is executed, the previously saved remote control does not exist, if you need to use the old remote control, please re-learn).

Adaptation (learning):

The first step (matching the remote control): Press any key on the remote control, if the LED light flashes quickly, it means it is a matching remote control, otherwise it is not a matching remote control.

Step 2 (enter learning mode): touch the button, the LED light goes out.

Step 3 (Learning the remote control): Press any key on the remote control within 10 seconds, the LED light flashes 3 times and then lights up, the learning is successful; if the LED light only flashes twice, the learning fails, indicating that the learning has been completed, through the remote control; learning Finish.

Note: Please use the remote control we sell, otherwise it may not be compatible with the remote control.

433M 8-button EV1527 remote control:

Power supply: 12V 23A battery is replaceable. (This remote control has no battery, please buy it in your local market)

Working current: ≤18mA;

Oscillation mode: SAW resonator;

Oscillation resistance: 270K

Modulation method: ASK OOK;

Working frequency: 433.92MHz;

Frequency deviation: ±0.2MHz;

Encoding format: million group code (EV1527);

Transmit power: 15 mW.

Data rate: 50~60KHZ;

Package list:

1*Module

1*remote control