Description
Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
Channel: 2 CH
Remote Control Distance:0-3000 M ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)
Encode: PT2262
Frequency:315 or 433 MHz
2.Receiver
1)Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Momentary,can change it by yourself.)
Decode: Fixed code, soldering
Power Supply (Operating Voltage): DC 12V / 24V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Sensitivity:-105 dBm
Operating Temperature:-40'C~+80'C
Current:Standby≤10mA,Working ≤80mA
3.Package Included
1 x Receiver (with cover)
2 x Transmitter (no battery inside)
4.Learn code and Remove Code
1). Learn:press the learning button .the indicator from on to off ,press key A,the indicator flashes and turns off .it means key A learning is successful.
press the learning button .the indicator from on to off ,press key B,the indicator flashes and turns off .it means key B learning is successful.
2).Remove :press the learning button about 5-8 seconds , the indicator turn on to off , it means the Code has been removed successfully.
