+
DVP08XM211N New Original PLC Digital Module ES2 Series 8DI
Thank you for choosing Delta’s DVP-ES2 series PLC. DVP-ES2 series provides 16~ 60 points MPU and 8 ~ 32 points digital I/O module. The maximum I/O points including those on the MPU are 256 points. DVP-ES2 can be used for various applications with different I/O points, power supply, digital I/O and analog I/O modules.
Applications
HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system
Specifications
1) MPU points: 16 / 20 / 24 / 32 / 40 / 60
2) Program capacity: 16k steps
3) Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
4) Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
5) DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
6) Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
7) New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
8) Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
9) Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta@@s AC motor drives
10) Password protection: Password for subroutine, user ID, restriction on trial times
11) Highly efficient instruction efficient instruction execution
Update 200 I/O extension points | LD instruction | MOV instruction | DMUL instruction | DEMUL instruction | |
ES2 | 1ms | 0.54us | 3.4us | 11.4us | 10.3us |
ES | 6ms | 3.8us | 18us | 150us | 55.4us |
Note | Update I/O extension module | Basic instruction | 16-bit data movement instruction | 31-bit multiplication instruction | 32-bit floating point multiplication |
Digital Input/Output Modules
Model | Power input | Input spec | Output spec. | ||
Points | Type | Points | Type | ||
DVP08XM211N | Supplied by bus power from MPU | 8 | 24VDC Sink or Source | - | - |
DVP08XP211R | 4 | 4 | Relay | ||
DVP08XP211T | 4 | 4 | Transistor | ||
DVP08XN211R | - | 8 | Relay | ||
DVP08XN211T | - | 8 | Transistor | ||
DVP16XM211N | 16 | - | - | ||
DVP16XP211R | 24VDC | 8 | 8 | Relay | |
DVP16XP211T | 8 | 8 | Transistor | ||
DVP16XN211R | - | 16 | Relay | ||
DVP16XN211T | - | 16 | Transistor | ||
DVP24XP200R | 100 ~ 240 VAC | 16 | 8 | Relay | |
DVP24XN200T | 16 | 8 | Transistor | ||
DVP24XN200R | - | 24 | Relay | ||
DVP24XN200T | - | 24 | Transistor | ||
DVP32XP200R | 16 | 16 | Relay | ||
DVP32XP200T | 16 | 16 | Transistor | ||
ƒElectrical Specifications
Model Item | 08XM211N | 08XP211… | 08XN211… | 16XM2 11N | 16XP211… | 16XN211… | 24XP200… | 24XN2 00… | 32XP200… |
Power supply voltage | Supplied by bus power from MPU | 24VDC (-15% ~ 10%) | 100 ~ 240VAC (-15% ~ 10%) 50/60Hz +- 5% | ||||||
Power consumption | 1.2W | R:1.2W T:1W | R:1.2W T:0.5W | 2.4W | R:2.4W T:1.6W | R:2.4W T:1W | 20VA | 20VA | R:25VA T:20VA |
DC24V current output | -- | 100mA | |||||||
Power supply protection | -- | Power reverse protection | Output short circuit protection | ||||||
Voltage withstand | 1,350VAC (Primary-secondary) 1,350VAC (Primary-PE) 500VDC (Secondary-PE) | ||||||||
Insulation resistance | > 5MΩ at 500VDC (between all I/O points and ground) | ||||||||
Noise immunity | ESD: 8KV Air Discharge EFT: Power Line: 2KV, Digital I/O: 1KV RS: 26MHz ~ 1GHz, 10V/m | ||||||||
Environment | Operation: 0°C~55°C (temperature), 50~95% (humidity), pollution degree2 Storage: -25°C~70°C (temperature), 5~95% (humidity) | ||||||||
Vib. / shock resistance | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea) | ||||||||
Weight (g) | 105 | R:120 T:107 | R:135 T: 109 | 148 | R:179 T:149 | R:209 T:143 | R:300 T:260 | R:390 T:310 | R:340 T:280 |
I/O Terminal Specifications
Input point electrical specifications | |||
Input point type | Digital input | ||
Input type | DC (SINK or SOURCE) | ||
Input current | 24VDC, 5mA | ||
Input impedance | 4.7KΩ | ||
Action level | Off → On | >15VDC | |
On → Off | < 5VDC | ||
Response time | Off → On | 10ms±10% | |
On → Off | 15ms±10% | ||
Output point electrical specifications | |||
Output point type | Relay-R | Transistor-T | |
Voltage specification | Below 250VAC, 30VDC | 5 ~ 30VDC#2 | |
Maximum load | Resistive | 2A/1 point (5A/COM) | 0.5A/1 point (4A/COM) |
Inductive | #3 | 12W (24VDC) | |
Lamp | 20WDC/100WAC | 2W(24VDC) | |
Switching frequency#1 | <=1Hz | <=1kHz | |
Response time | Off → On | Approx .10ms | 50μs |
On → Off | 200μs | ||
#1: The actual frequency will be affected by the scan period.
#2: UP, ZP must work with external auxiliary power supply 24VDC (-15% ~ +20%), rated consumption approx. 1mA/point.
you may need this
Structure : Single-side Bracket
is_customized : Yes
Material : Metal
Origin : CN(Origin)
Model Number : DVP08XM211N
Usage : Industrial
Certification : NONE
DIY Supplies : ELECTRICAL
Standard or Nonstandard : Standard
Status : New
