◆For our smart bms,when first use,need to activate first,then B- P- can be conductive,BMS can work well.

Activation method:

Method ①: Purchase the power board,there is an activation switch on the board and click the button.

Purchase link is ：

Method ②: Charge activation, B-line must be connected to the total negative pole of the battery pack when

charging . 3S~5S, J series (10J, 16J ) BMS only can be activated by this way.

◆ BMS shipping package includes accessories BT module *1pcs  *NTC cable(temperature sensor). and balance cable

*1pcs and English manual *1pcs,Package also come with B-P- cable,

◆ the Android and IOS APP available to download.

◆ Pls refer to following link to understand bluetooth set up by APP.

//www.dalyelec.cn/newsshow.php?cid=24&id=74⟨=1

If you need any other accessories ,you can order from this link :

Main Functions Description:

Over-charging protection: Yes

Over-discharging protection: Yes

Over-current protection:Yes

Temperature protection: Yes

Disconnect protection: Yes

Short Circuit Protection : Yes

Short Circuit protect recover : Yes

Balance Function: Yes

More specific parameter values are in the description picture

Advantages:

1. BMS was be manufactured by high quality Mos and IC imported . Keep your battery long cycle service life time.

2. Use top quality (A-level) protective integrated circuit IC, from the solution of Japan.

3. Extreme low power consumption. The consumption of the whole device is less than 50uA.

4. PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating