Advantages of V15.0 Versions

1. Longer copy distance (Old: 4-5cm, V15.0 max: 50-60cm, easier to copy the remote with weaker signal)2. Longer control distance3. No battery problemExclusive sales of latest version V15.0 version.V15.0 is the latest version released on April 20, 2021. Other sellers are selling the old version V6.1 or V6.3 of 2017-now.

ERREKA garage remote control

NoteWhat you receive is the remote control pointed by the arrow. It is a third-party remote control. It is not an original remote control.Please note that ERREKA has many programs. Their cloning methods are different, if you can't clone it, please contact me.

The black remote is compatible with all ERREKA 433mhz 868mhz rolling code and fixed code

Include

1 x Remote Control1 x Battery1 x Keychain1 x English Manual

Easy to use

1. Press button 1 and button 2 at the same time, release button 2, press button 2 again 4 times, until the LED flashes once every three seconds2. Place the original remote control in front of the new remote control (approximately 4 to 5 cm), press the button of the original remote control to be copied until the LED of the new remote control flashes quickly (the LED flashes regularly)3. Press the button of the new remote control you want to use4. If you cannot copy successfully, please repeat the above steps5. After the copy is successful, do not use any remote control, then place the new remote control near the receiver to activate it, press and hold the button until its Led flashes quickly, and then6. For the rolling code remote control, it should be programmed together with the receiver after cloning. The programming method is the same as the original remote control programming.Usually the motor must be turned on to find the receiver's programming buttons. Press the programming button, and then press and hold the clone remote control button for a period of time to program.

SMG-002 is only compatible with the 433mhz fixed code ERREKA, and there must be 8 Dip switch inside ERREKA.

How to use our remote control

Step:1:Clear the history code from duplicator1:Press button A and B continuously until LED flash 3 times2.Release button B (Keep pressing button A),and press button B Slowly for 3 times,LED flash3.Release button “A”,finish code clearance.Step 2,Copy code from original transmitter1 Put duplicator aside of original transmitter,as close as possible.2 Press and hold button A of original transmitter,then press and hold button A of duplicator until you see the duplicator’s LED flash3 Release both buttons,finish code copy,copy other button in same

Cilp

Visor and easy to find,adjustable to accommodate different size remotes. It is very easy and convenience to be used for all kinds of doors/windows remote control and other industrial remote control. Specifications:

note:

The remote control is not included here