The remote you have ,which the Chip number shows: PT2240 PT2260 PT2262 EV1527 FP527 AX5326 PT2262 PT2242 HT600 HT680 HT6207 HT6010 HT6012 HT6014 AX5326-4 SMC5026 SMC5326-3 SMC5326-4 SMC918 SMC918-3 ect Please know it ,it can not copy rolling code remote . Frequency: 310MHz

How to Program

1) Erase the code Press and hold both of the "lock"(1 or A) and "unlock" (2 or B)button on the remote control at the same time, after a few seconds, the LED will flash 3 times, then keep press and hold "lock"(1 or A) ,release the unlock" (2 or B) button, then press the unlock" (2 or B) 3 times , you will find the LED fast flash . it mean delete the factory code successful. 2) Duplicating Hold the original remote controller by left hand and hold the copy remote controller by right hand, please make sure the 2 remote controllers close up. Press both of the lock buttons of the 2 remote controllers at the same time and hold, the LED flash 3 times 10 seconds late, then fast flashing which indicated the code of the lock button is duplicated by the new remote controller. Then to operate as the above method to duplicate other 3 buttons3) Resume If you erase the code stored on the copied remote controller in caution, you can resume it by pressing and holding both of the the NO.3/C & NO.4/D Button at the same time till the LED fast flash .it mean recover the code which you lost.

About feedback:

1. We are committed to your satisfaction. Your positive feedback and 5 stars rating will be highly appreciated.2. If you are not satisfied by any means, please give us an opportunity to offer you a proper solution. Thanks!

Contact us: