| ESD5220 |
| Isochronous Operation/Steady State Stability |
± 0.25% or better |
| Speed Range/Governor |
1K-7.5K Hz continuous |
| Speed Drift with Temperature |
± 1% Maximun |
| Idle Adjust CW |
Min. 1200Hz. below set speed |
| Idle Adjust CCW |
Min. 4100Hz. below set speed |
| Droop Range |
1-5% regulation |
| Droop Adj. Max. (K-L Jumpered) |
875Hz., ± 75Hz. per 1.0 A change |
| Droop Adj. Min. (K-L Jumpered) |
15Hz., ± 6Hz. per 1.0 A change |
| Speed Trim Range |
± 200Hz |
| Remote Variable Speed Range |
500 -7.5Hz. or any part thereof |
| Terminal Sensitivity |
J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance |
| L: 735Hz., ± 60Hz/Volt @ 65 K Impedance |
| N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance |
| P: 10V DC Supply @ 20ma Max |
| Speed Switch Adjustment Range |
1000-10000Hz. |
| ENVIRONMENTAL |
| Ambient Operating Temperature Range |
-40°c to +85°c |
| Relative Humidity |
up to 95% |
| Storage Temperature |
-55°c ~ 90°c |
| Shock |
20-100HZ 500mm/Sec. |
| INPUT POWER |
| Supply |
12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected) |
| Polarity |
Negative Ground(Case Isolated) |
| Power Consumption |
50mA continuous plus actuator current |
| Maximum Actuator Current at 25 |
10Amps continuous |
| Speed Sensor Signal |
0.5-120 Volts RMS |
