Description
Original imported G-450 ACF conductive glue removal liquid LCD cable repair removal liquid
100ml/500ml/1L
There are many specifications and models, please contact us.
First, product introduction
ACF
removal fluid is a high-tech product produced in Korea. This product
can perform a good expansion and separation effect on the heated and
hardened ACF glue.
Second, product related parameters
Ingredients: Organic Acid Storage: Room temperature / sealed and protected from light
Appearance: colorless liquid, ignition point: no
Boiling point: 45 ° C Flash point: 470 ° C
Third, the method of use
*Use concentration: use the stock solution at room temperature.
*Note: The liquid is strongly acidic. Do not touch the skin directly when opening the bottle.
*Emergency
measures: If the skin is inadvertently contacted, please wash it with
water immediately. If you have eyes, wash it with water and go to the
hospital for treatment.
Four *How to use and precautions
1. Local ventilation should be used in the place of use.
2, use protective gloves and other protective equipment when using
3.
When opening the ACF removal bottle, the internal GAS may appear
suddenly (especially in summer), so the cover should be opened slowly.
Please use the ACF removal solution in the designated small container.
Use 25ML to cut the scissors or blade. It can be used as a small
opening, which is a good helper for repairing.
4.
Apply a cotton swab dipped in ACF on the LCD with hardened ACF and wait
for about 20 seconds. After it dissolves and swells, use a cotton swab
or a dust-free cloth to wipe it cleanly, and it will be clean and will
not hurt the ITO line.
Fifth, the packaging method
Storage method: The solvent should be stored at room temperature.
This solvent is volatile and should not be used in the basement or in poorly ventilated areas.
Price concessions, higher performance, welcome to wholesale!