Maxpeedingrods GT35 GT3582 Turbo Charger T3 AR.70/63 Anti-Surge Compressor Turbocharger Bearing

Introduction:

Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power. 

Application：

Perfect for all 4/6 cylinder and 2.5L-6.0L engines

Horse Power: Capable of Boosting Horse Power up to 600HP

Features：

• Exhaust (Turbo Manifold) Flange：T3 Flange

• Exhaust (Downpipe) Flange：4 Bolt

• Wastegate：External Wastegate

• Bearing Type: Wet Float

Compressor：

• Compressor Trim：56.9

• Inducer Diameter：61.5 mm

• Exducer Diameter：81.5 mm

• Compressor A/R：0.7

Turbine：

• Turbine Trim：84.2

• Inducer Diameter：68 mm

• Exducer Diameter：62.4 mm

• Turbine A/R：0.63

Compress Inlet Size(Air intake): 4 inch (103.5mm)

Compressor Outlet Size: 2.5 inch (63.6mm)

Wastegate：External Wastegate

Oil feed/inlet: M10*7/16-24

Oil drian/outlet: 2*M8*1.25

water inlet/outlet: M14* 1.5

Maximum PSI：22

Product Material:

• 1. Turbine housing ：Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius

• 2. Steel Turbine Wheel：Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius

• 3. Compressor housing：ZL104 aluminum

• 4. compressor wheel/blades：Cast aluminium with good gas tightness and corrosion resistance

• 5. Max HP： UP to 600hp

Condition: 100% Brand New

Warranty：2 Years

Accessories: You will get exactly as shown in the picture above

NOTE:

* Professional installation is highly recommended 

*This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please review the specifications and verify compatibility prior to placing your order. 

* For any needs please contact us

Notice:

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage. 

* Make sure the oil drain line is lower than the turbo itself. 

* Gasoline car must install a water cooling device to avoid overheating. 

* Ensure exhaust outlet are well sealed by welding.

* To protect the turbochager and your car engine, Air filter is necessary. 

NOTE： Lacking of oil will casue turbocharger shaft play and damage , please adjust your oil pressure & make sure turbochager is fully lubricated.

* This is universal application turbo, so modification might be required for some vehicles.