GT35 GT3582 Turbo Charger T3 AR.70/63 Anti-Surge Compressor Turbocharger Bearing

Introduction:

Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods GT35 GT3582 turbocharger is excellent for single turbo applications for 4 or 6 Cylinder Engines, Don't hesitate to get a turbo to boost your car's power. 

Looking to boost your car's power? Is your car's original turbocharger not performing well, or does it need replaced? Maxpeedingrods stocks all the best quality turbochargers, turbo parts to give your car the power, performance and reliability you deserve.  Maxpeedingrods aftermarket replacement turbo provide the perfect solution by delivering a high-quality turbo at a budget-friendly price.

Application：

Perfect for all 4/6 cylinder and 2.5L-6.0L engines

Horse Power: Capable of Boosting Horse Power up to 600HP

Features：

• Exhaust (Turbo Manifold) Flange：T3 Flange

• Exhaust (Downpipe) Flange：4 Bolt

• Wastegate：External Wastegate

• Bearing Type: Wet Float

Compressor：

• Compressor Trim：56.9

• Inducer Diameter：61.5 mm

• Exducer Diameter：81.5 mm

• Compressor A/R：0.7

Turbine：

• Turbine Trim：84.2

• Inducer Diameter：68 mm

• Exducer Diameter：62.4 mm

• Turbine A/R：0.63

Compress Inlet Size(Air intake): 4 inch (103.5mm)

Compressor Outlet Size: 2.5 inch (63.6mm)

Wastegate：External Wastegate

Oil feed/inlet: M10*7/16-24

Oil drian/outlet: 2*M8*1.25

water inlet/outlet: M14* 1.5

Maximum PSI：22

Condition: 100% Brand New

Warranty：2 Years

Accessories: You will get exactly as shown in the picture above

NOTE:

* Professional installation is highly recommended 

*This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please review the specifications and verify compatibility prior to placing your order. 

* For any needs please contact us

Notice:

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage. 

* Make sure the oil drain line is lower than the turbo itself. 

* Gasoline car must install a water cooling device to avoid overheating. 

* Ensure exhaust outlet are well sealed by welding.

* To protect the turbochager and your car engine, Air filter is necessary. 

NOTE： Lacking of oil will casue turbocharger shaft play and damage , please adjust your oil pressure & make sure turbochager is fully lubricated.

* This is universal application turbo, so modification might be required for some vehicles.