Description

Household 800W Pure Sine Wave Inverter 12V 24V 36V 48V 60V 72V DC TO 110V 220V 230V AC Off Grid Inverter Power Converter For car

1.The company can customize various types of power supply.

2. We will have corresponding discount on price and logistics.

3. If you have any questions, please contact customer service.

Specification

1) Power selection

Solar energy, wind power generation system, communication power supply system, vehicle battery. The input voltage shall correspond to the input voltage of the inverter.

2) Connection between inverter and battery

A: The connecting line between inverter and battery should not be too long, but as short as possible.

B: Battery power supply: connect the negative pole of the battery to the black terminal of the inverter, and the positive pole of the battery to the red terminal of the inverter.

3) Operation of inverters and consumers

Ensure that the peak power of the inverter is within the range of the nominal load and cannot exceed the starting power of the inverter

Protection function

1) Input low voltage protection

The AC output is turned off and the red light is on. When the voltage returns to normal, start the inverter to resume operation

2) Input overvoltage protection

The AC output will turn off automatically and the red light will be on. When the voltage returns to normal, start the inverter to resume operation

3) Short circuit protection

When a short circuit occurs, the output is turned off and the red light is on. When there is no short circuit, the 220V output is restored.

4) Battery polarity reverse protection

If the positive and negative connections are reversed, the inverter does not work. Replace the standby fuse to restore the normal output

5) Inverter temperature protection

Intelligent control of fan temperature: when the temperature of the inverter exceeds 50 ℃, the fan will start automatically, when the temperature is lower than 50 ℃, the fan will stop automatically, when the temperature exceeds 80 ℃, the AC output will close automatically, and the red light will be on until the temperature returns to 50 ℃.

6) Overload protection

When the load exceeds 130% of the rated power of the inverter, the AC output will be automatically closed and the red light will be on. After the load is cancelled, the inverter output will be restored.

Parameter table