Description

Description:

EASY plug GP2Y1014AU PM2.5 Dust sensor is particularly effective in detecting very fine particles, such as cigarette smoke, and is commonly used in air purifier system.

In the device, an infrared light emitting diode and a phototransistor are diagonally arranged to allow it to detect the light reflected by dust in the air.

The sensor has very low current consumption (up to 20mA, typical of 11 mA) and can carry up to 7VDC sensors.

The output is an analog voltage proportional to the measured dust concentration, with a sensitivity of 0.5V/0.1mg/m3.

The sensor's four pins are led out as Registered Jack, allowing you to connect it to EASY plug Control board V2.0 for communication with only an RJ11 cable. 

Technical Details:

• Power supply voltage: 5-7V
• Working temperature: -10 to +65 degrees Celsius
• Current consumption: 20mA maximum
• Minimum particle detection: 0.8 microns
• Sensitivity: 0.5V/(0.1mg/m3)
• Voltage in clean air: 0.9V (typical)
• Working temperature: -10°C to 65°C
• Storage temperature: -20°C to 80°C
• Service life: 5 years
• Dimensions: 35.6mm × 69.7mm × 28mm
• Weight: 27g

How to Test it?

Example 1:  Connect It Up: