LM2596 DC-DC Buck Module:

Name : LM2596 DC-DC Buck module

The output voltage : 1.25V ~ 30V

Output Current :3A( Max)

Conversion efficiency:92%( MAX )

Output ripple: <30mV

Switching frequency: 65KHz

Working temperature: -45~ +85°

Size :43mm * 21mm * 14mm(Long*Width*Hight)

Features:

1.the range of input voltage: 3.2 V to 40 V dc (input voltage must be higher than to the output voltage of 1.5 V above. Can't booster)

2. the range of output voltage: 1.25 V dc to 35 V voltage adjustable, high efficiency (92%) largest maximum output current is 3A.

Instructions:

1. Power (3-40V), power indicator light, the module is working properly.

2. Adjust the blue potentiometer knob (clockwise rotation generally boost,counter-clockwise rotationTurn down) and reach with a multimeter to monitor the output voltage required voltage.

Note:

Current work long hours is recommended for use in less than 2.5A, while adding bulkHeat sink (10W output above),because it is the step-down module, in order to ensure stable output Set,please keep the minimum 1.5V differential.

LM2596 + Voltmeter Buck Module:• Cut size: 66mm x 35mm• Input voltage: DC 4.0 ~ 40 V• Output voltage: 1.25 V ~ 37 V (continuously adjustable, the input voltage must be 1 V higher than the output voltage)• Output current: 2A (normal and stable), 3A max.• Ripple frequency: approximately 150 Khz• Ripple peak: around mV• Screen color: red• Voltage meter error: ± 0. 1 V• Measuring range: 4 ~ 40 V (to measure accurately, make sure the input voltage is more than 4 V)• IN +: positive entry• In-: negative entryOut out +: positive output• Outside: Negative output

Prodct Size：6.1*3.4*12cm

Features• An input and output voltage switch• Green light: Output voltage measurement• Red light: Input voltage measurement• With terminal and maintain the cable connection point