+
Leadshine Easy Servo Set (Closed-Loop Stepper )HBS86+57HS20-EC-1000
Leadshine Easy Servo Set (Closed-Loop Stepper )HBS86+57HS20-EC-1000 ,1000-Line Encoder
Leadshine hybrid servo motor 57HS20-EC-1000,5.8A phase current, 2N.m torque, shaft dia.8x21, motor length 97mm, matches with Leadshine drive HBS86.
| Model: | 57HS20-EC |
| Frame Size: | NEMA 23 |
| Phase: | 2 |
| Step Angle: | 1.8deg. |
| Number of Leads: | 4 |
| Holding Torque: | 283.0 Oz-In |
| Encoder Resolution: | 4,000 CPR |
| Shaft Size: | 0.315 inch |
| Phase Current: | 5.8 A |
| Inductance: | 2.0 mH |
| Resistance: | 0.37 Ohm |
| Rotor Inertia: | 0.00677 oz-in-sec2 |
| Length: | 3.82 inches |
| Weight: | 2.75 lbs |
Leadshine 57HS20-EC-1000 is a 2-phase hybrid servo motor (closed-loop stepper motor). It is built with high quality material and can move smoothly with very low noise and heating. When driven by Leadshine easy servo drives (closed loop stepper drives), the position loop between 57HS20-EC-1000 and the drive is closed. You will never get stall or loss of steps, often seen in open loop stepper systems. Because there is no torque resolution needed like in open loop stepper systems, you can much better high speed performance than open loop stepper systems by increasing up to 30%.
Package includes:
servo motor x1pcs
servo drive x1pcs
cables, accessories x1set
Construction : Permanent Magnet
Torque : 2N.m
Type : Servo Motor
Certification : CCC,ce,ROHS,UL
Protect Feature : waterproof
Efficiency : IE 1
Model Number : HBS86+57HS20-EC-1000
Continuous Current(A) : 5.8A
Commutation : Brush
