Description

Description:

1.Support for 3-axis linkage, you can connect three stepper motor drives or servo drives

2.Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor

3.3 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc

4.Support for connecting electronic handwheel

5.Have 0-10V signal output , you can use mach3 software to control the spindle motor speed

6.4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device

7.1 status LED, indicate connection status on the board

8.Resolution 1、1\2、1\8、1\16 micro stepping output

9.Three channles 3.5A adjustable output current for 2/4 phase bipolar stepper driver

10.Bulid with 4 outputs and 5 inputs

Size: 11.7x17.5cm/4.61x6.89inch

Quantity: 1 Set

Note:

Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Contents:

1 x USB CNC Controller Card