feature:

1. Built-in industrial microcontroller.

2. Large LCD display, system control parameters are all adjustable.

3. Full 4-level PWM charging management.

4. Built-in short circuit protection, open circuit protection, reverse protection, overload protection and all necessary protections.

5. Double mosfet reverse current protection, low heat generation

LCD display/keys and operation:

MENU: Switch between different displays, or long press to enter/exit settings.

UP: Press to increase the value.

DOWN: Press this key to decrease the value.

System connection:

1. Connect the battery to the charge regulator-positive and negative.

2. Connect the photovoltaic module to the regulator-plus and minus.

3. Connect the consumer to the charging regulator-positive and negative.

*The order is reversed when uninstalling!

*Incorrect may damage the controller!

attention:

1. Press the [Down] key on the main display to manually turn on/off the load.

2. The working mode is as follows:

[24H] Load output for 24 hours

[1-23H] Load after sunset, close after set time

[0H] Dusk to dawn

3. Battery: only applicable to OPEN, AGM, GEL

4. The charging regulator is only suitable for regulating solar components, do not connect other charging power sources to the charging regulator.

5. Before installing for the first time, please make sure that your battery has enough voltage for the controller to recognize the battery type.

Specification:

Load: light control

MPN: RBL

Charging method: PWM

Model: RBL-60A

System voltage: 12V 24V

Maximum solar input (solar panel): 36V (24V battery) 18V (12V battery)

Maximum input power: 650W (12V system); 1300W (24V system)

Balance: 12.6V (sealed) 14.2V (gel) 14.6V (overflow)

Floating charge: 13.7V (default, adjustable), 12.0-15.0V

Discharge stop voltage: 10.7V (default, adjustable), 9.0-11.5V

Discharge reconnection voltage: 12.5V (default, adjustable), 11.0-13.0V

Rated current: 100A

Self-consumption: <10mA

Battery: only applicable to OPEN, AGM, GEL

Working temperature: -35℃~60℃

USB output: 5V/2A Max

Size: 13.4*7*3.3cm

The package includes:

100A solar charge controller*1