Specifications Of The Receiver:

Model Number: KR1202-4Input voltage: 12VWorking current: 10AMaximum load power: 110W x 2Frequency: 433MhzSupport encoding format: EV1527Wiring method: GND V+ M1 M2Working mode: Momentary, Toggle, Latching Time delay

Instructions:

The first step: Clear the receiver's memoryPress the Learning Button on the receivers for 8 times, the codes will be cleaned.After cleaning the code, all the remote control can not work any more.Step Two : Match Wall Panel Remote Transmitter and ReceiverPress the learning key on the receiver twice time, it comes into toggle setting mode.Wait for a moment, the LED will be on , it comes into learning state.Press the remote button, LED indicator on the receiver board will flash then come offLearning successfully.

Specifications Of The Remote Control:

Model Number: KT09-117S-4Working voltage: DC3VWorking current: <25mAWorking frequency: 433MHZTransmitting power: +13dbmRemote control distance: 100MEncoding format: 1527 encodingWorking environment: -15*75 degrees Celsius

About receiver's Working Mode:

Momentary mode: Press the Remote control button, the receiver's relay is ON; release button, the receiver's relay is OFF.Toggle mode: Press Remote control button for 1 time, the receiver's relay is ON; press button again, the receiver's relay is OFF.Latched mode: Press Remote control button A, the receiver's relay is ON, Press the transmitter's button B, the receiver's relay is OFF.Reset function: After push the receiver's learning button 8 times, the receiver Clear all the remote control data in its memory.When the red LED flashes for a few times, it indicates that the clear function is completed.(After cleared the code in the receiver, all the remote control cannot work with the receiver.)Matching method:1. Setting momentary Mode:Press the receiver's Learning button 1 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully.2. Setting Toggle Mode (Common working mode):Press the receiver's Learning button 2 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully.3. Setting Latched Mode:(Note: When you choose "Latched Mode", you need to setting two different buttons on the Remote control, the first time learn is for "ON", the second time learn for "OFF".For example: button A = ON, button B = OFF)Press the receiver's Learning button 3 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's A button, the receiver's red LED will flash and then remains lit; Then press the remote's B button, the receiver's red LED will flash then come off, Setting successfully.

The package Included different products because you choose a Different options:

Package List 1:

1Pcs * KT09-117S-4 433Mhz Remote Control ( Include Battery And Box)

Package List 2:

1Pcs * KR1202-4 433Mhz Receiver Module

Package List 3:

1Pcs * KT09-117S-4 433Mhz Remote Control ( Include Battery And Box)1Pcs * KR1202-4 433Mhz Receiver Module

Package List 4:

2Pcs * KT09-117S-4 433Mhz Remote Control ( Include Battery And Box)1Pcs * KR1202-4 433Mhz Receiver Module

Note:

1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.2. Please promptly change battery when remote control voltage is insufficient (when the battery voltage is insufficient, generally get close transmitting).3. Please pay attention to avoid metal mask,large equipment,strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board.4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.