Raspberry Pi CM4 Nano Base Board (B) USB CSI DSI Mini HDMI-Compatible Gigabit Ethernet RJ45 Same Size as the CM4 for RPI

Category : Computer & Office | Computer Components

USD 15.41USD 27.03

Raspberry Pi CM4 Nano Base Board (B) USB CSI DSI Mini HDMI-Compatible Gigabit Ethernet RJ45 Same Size as the CM4 for RPI

Description
Specification

Description

Nano Base Board (B) For Raspberry Pi Compute Module 4, Same Size As The CM4

Nano Base Board (B) For CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Compact, Yet Complete

Standard CM4 Socket, 40PIN GPIO, Gigabit Ethernet, USB2.0, DSI, CSI, 3.5mm Audio Jack...All In The Compact Body Just As The Size Of CM4

Note: the CM4 is NOT included. Please buy it separately if necessary.

Specifications

CM4 SOCKET	suitable for all variants of Compute Module 4
NETWORKING	Gigabit Ethernet RJ45 connector
CONNECTOR	Raspberry Pi 40PIN GPIO header × 1
USB	USB 2.0 Type A connector × 1
DISPLAY	MIPI DSI port × 1 (15pin 1.0mm FPC connector)
CAMERA	MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
VIDEO	Mini HDMI port × 1, supports 4K 30fps output
AUDIO	3.5mm jack
STORAGE	Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
POWER INPUT	5V
DIMENSIONS	56 × 41mm

What's On Board

CM4 socketsuitable for all variants of Compute Module 4
Micro SD card slotfor connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
40PIN GPIO headerfor connecting sorts of HATs
Gigabit Ethernet RJ45 connector
Power supply / Programming5V power supply, or used for eMMC burning
3.5mm audio jack
User button
USB2.0 connectorfor connecting sorts of USB devices

CSI connectorMIPI CSI camera interface
DSI connectorMIPI DSI display interface
MP1658
Mini HDMI connectorsupports 4K 30fps output
BOOT switchON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)

Outline Dimensions

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

PACKAGE CONTENT

1.CM4-NANO-B x1

2.2*20PIN color-coded straight pinheader x1

Nano Base Board (A) For Raspberry Pi Compute Module 4, Same Size As The CM4

Nano Base Board (A) For CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Same Size As The CM4

Standard CM4 Socket, With Multiple Peripheral Interfaces, Suitable For Narrow Application Environment

Note: the CM4 is NOT included. Please buy it separately if necessary.

Specifications

CM4 SOCKET	suitable for all variants of Compute Module 4
CONNECTOR	Raspberry Pi 40PIN GPIO interface × 1
USB	USB 2.0 Type A interface × 1
CAMERA	MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
STORAGE	Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
POWER INPUT	5V
DIMENSIONS	55 × 40mm

What's On Board

CM4 socketsuitable for all variants of Compute Module 4
Power supply / Programming5V power supply, or used for eMMC burning
Micro SD card slotfor connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
CSI interface1 × MIPI CSI camera interface
USB2.0 interfacefor connecting sorts of USB devices

40PIN GPIO interfacesuitable for connecting to various HAT modules
PWR indicatorCM4 power status
ACT indicatorCM4 working status
AMS1117-3.3
BOOT switchON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)

Outline Dimensions

PACKAGE CONTENT

CM4-NANO-A x1
2*20PIN color-coded straight pinheader x1

Nano Base Board (C) For Raspberry Pi Compute Module 4, Same Size As The CM4, Onboard 8MP Camera

Nano Base Board (C) For CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Multiple Interfaces, Onboard 8MP Camera

Same Size As The CM4, Standard CM4 Socket, With Multiple Peripheral InterfacesOnboard 8MP Camera Module With 160°FOV To Meet Your Needs In The Application

for reference only, the CM4 is NOT included.

Specifications

CM4 SOCKET	suitable for all variants of Compute Module 4
CONNECTOR	Raspberry Pi 40PIN GPIO header × 1
USB	USB 2.0 Type A port × 1
DISPLAY	MIPI DSI port × 1 (15pin 1.0mm FPC connector)
CAMERA	IMX219-D160 (8MP, 160°FOV)
VIDEO	Mini HDMI port × 1, supports 4K 30fps output
STORAGE	TF card socket for Compute Module 4 Lite (without eMMC) variants
POWER INPUT	5V
DIMENSIONS	55.0 × 40.0mm

Application Example

for reference only, please refer to the part list for detailed package content.

What's On Board

CM4 socketsuitable for all variants of Compute Module 4
Mini HDMI portsupports 4K 30fps output
DSI portMIPI DSI display interface
USB2.0 portfor connecting sorts of USB devices
TF card slotfor connecting a TF card with pre-burnt image (Lite variant ONLY)
Power supply / Programming5V power supply, or used for eMMC burning
40PIN GPIO headerfor connecting sorts of HATs

IMX219-D160 Camera8MP, 160° FOV
User buttonConnect to GPIO21
BOOT switchON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or TF card)
ACK IndicatorCM4 working status
PWR IndicatorCM4 power status

Dimensions