• Hot Sale

• Statement：

Both of these are trademarks of our company.

Official website：www.elcb.net

• generally
   
  ***It is AC-S type delay type RCCB 2P 4P 40A 63A 100mA/300mA***
  S type (delay)
  S-type RCD is a sinusoidal residual current device with time delay. It can be installed upstream of an AC-type RCD to provide selectivity. Delayed RCD cannot be used for additional protection.
  When the circuit has multiple RCCBs, a delay unit can be used "upstream" to allow the RCCB or RCBO downstream of the circuit to trip first and prevent the entire circuit from accidentally tripping.
   
   
   
  TORD1S-63 leakage circuit breaker is suitable for circuits with AC 50/60Hz, 2-pole rated voltage 230V, 4-pole 400V, and rated current up to 100A. When the power grid exceeds the specified value, this product can cut off the fault current in a short time to protect people and equipment. It can also be used for infrequent starting of circuits and motors. This circuit breaker is suitable for various places such as industry, commerce, high-rise building, family and so on.
   
   
  Comply with IEC/EN61008-1.
  The double-sided bus wiring capacity adapts to a wider range of places.
  The maximum connection capacity is 35mm, and the wiring torque is 3.5N*m, which is suitable for a variety of installation equipment.
  Protection level: IP20.

• Technical Data:

• 

  About Us