SMATRUL 1 2 3 Gang Smart Home Wireless Touch Switch Light 433MHZ RF Remote Control Relay Glass Screen Wall Panel Button Led Lamp
Our advantage:
1.First suggest watching the video in the link, you can better understand the product3. Night fluorescent function, multiple combinations (free pairing signal), remote remote control4.After the power is turned off, turn it on again. Keep closed5.Highly sensitive design, Drawer box design, Luminous fluorescent strip, Drop resistance design, Large panel, etc.
Maximum current: 10A / each controller
For Example:Voltage = 220V, Power = <2000W; Voltage = 110V, Power = <1100W
Avoid Darkness and Save Energy
Turn the lights on in advance to avoid darkness.Turn off the lights after leaving, save energy
Free combination
Control multiple lights from multiple places
Working principle
Input and output intermediate access controller. Wireless switch control current is turned off and on at 433 MHz
100M LONG RANGE (in Open area)
Tip: The obstacle will shorten the distance, the wireless signal is affected by the environment, the more obstacles, the shorter the distance.
Controller parameter
Size: 80 * 40 * 25MMWorking frequency: 433MHZMaximum current:: <10AVoltage: AC100 ~ 240V 50 / 60HZ
More Assured And Safer
After the power is turned off, turn it on again. Keep closed
Wireless switch parameters:
Size: 86 * 86 * 10MMWorking frequency: 433MHZBattery: CR2032 battery (excluding battery)Distance: 100M (in open area)
Drawer box design
Cr2032 Battery , easy to replace the battery The service life is about 12 months. Life and frequency of use are related. Time may be longer(Does not contain battery)
Place Anywhere
Screw + double-sided adhesive installation
Controller installation
1.When installing, please turn off the power2.If the N and L wires of the input terminal are installed oppositely, the lamp will be slightly bright or flickering.3.If the input and output terminals are installed in opposite directions, the receiver may become unstable or inoperable.
How to pair signals
Method 1:1.Press and hold the learning key for 3 seconds until the indicator light stays on (Controller)2.TOUCH the wireless switch 1 times 3.Indicator light (Controller )flashes twice4.Pairing signal succeedednote:Entering the learning code mode will last about 10 seconds. If there is no operation, it will automatically exit the learning code mode.
Method 2: No need to climb stairs to pair signals1.touch quickly the (1) wireless switch 4 times 2.touch the (2) wireless switch 6 times 3.Pairing signal succeedednote:1.Prerequisite: Before operating this step, there must be a pairing signal between the remote control and the controller
How to clear the signal
1.Press and hold the learning key for 10 seconds about ,until the indicator light Flashes quickly (Controller) 2.All signals will be cleared
note:
1. professional electrician should operate this product. When powering on, do not touch the antenna. Install this product without opening the protective cover2.This controller will not be available if a wall switch with RF function is installed at home. Otherwise the function will be affected. Just need to buy a separate wireless switch3. Do not operate with power. Turn off the power supply and operate it. If the test is confirmed to be correct, use it under the guidance of a professional electrician.4. When the voltage of the remote control is insufficient, please change the battery in time (the remote control distance becomes closer when the remote control battery voltage is insufficient).5. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, to avoid remote control and short receiving distance or to work normally.6. Do not use this electronic product abnormally. Abnormal use will reduce product performance and longevity. In severe cases, damage to the product will also pose a safety hazard.
Certification : ROHS
Item Type : Switches
Origin : CN(Origin)
Brand Name : SMATRUL
Switch Type : Touch On/Off Switch
Certification : ce
Warranty : 1 year
Current : 10A
Material : Plastic
wireless switch working frequency : 433.92MHZ
Controller Maximum current : 10A
Is Smart Device : Yes
Model Number : WHC-H9
Controller Operating temperature : -10 elsius~+70 Celsius
wireless switch Transmit power : <10mW
Controller Receiving sensitivity : -108dBM
Controller Operating Voltage : AC 85V-240V 110V 220V 60HZ/50HZ
Controller working frequency : 433.92MHZ
wireless switch Remote control distance : Up to 100m(in the open area)
wireless switch Coding method : Learning Code EV 1527
wireless switch battery : CR2032 Alkaline Battery ( Not Included Battery)
wireless switch Modulation : ASK
Feature 1 : Led Light Lamp Switch, Home Security Alarm System
Feature 2 : HD Crystal Glass
Feature 3 : For 433Mhz RF Receiver 1527 EV1527 Learning Code Button
Feature 4 : Wet hands can also touch
Feature 6 : Caring for the elderly, children, women, pregnant women
Feature 5 : Drop resistance design,four-corner arc transition
Feature 7 : Fluorescent strip design, luminous