Reminder: This product is the price of a frequency divider

Product parameters: Size: 88MM in length, 70MM in width and 33MM in height.

Installation diagonal hole 97MM adjacent angle: 59MM

Power: 100W (for subwoofers from 4 inches to 10 or less). Impedance: 4-8 ohms.

Crossover point: 125Hz.

【product description】 The subwoofer crossover is a special crossover for the gun box. After installing the crossover, you will feel that the bass is more, and the human voice is smaller, and the treble is completely gone. In addition, the speaker will be quieter than when it is not connected. This is Normally, after all, the subwoofer sound is not as loud as the midrange sound. The subwoofer crossover is installed inside the subwoofer box, and it is not visible from the outside. Many finished gun speakers are saved by the manufacturer. In fact, the cost of the subwoofer crossover is relatively high, or use a very low-end crossover, or directly Connect straight through. If the gun is not equipped with a crossover, the sound will have a midrange, and it will not be a pure gun drum sound that removes the mid and high pitches; with the crossover, the woofer will not be in the piston state by the mid and high frequency interference, and the strength is naturally better. The one without the crossover is bigger.  

The material is very sufficient, with a diameter of 51MM pure copper large inductor, the capacitor is a high-current horizontal through-spindle electrodeless capacitor for audio, which can instantly reach the target sound range.

'