T3 T4 Turbo .63 A/R Oil Hybrid V Band Universal Turbocharger for 4 6 Cyl tcd

Application:

Perfect for all 4 or 6 CYL, 1.5L- 2.5L engines

Horse Power: Capable of Boosting Horse Power up to 420HP

Bearing: Journal Bearing

Specification:

Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns

Exhaust Outlet (Downpipe) Flange: V-Band Flange

Bearing: Journal Bearing

Cooling Type: Oil Cooled

Wastegate: Internal Wastegate

Compressor：

Trim: 48.1

A/R: 0.5

Inducer: 52.7mm

Exducer: 76mm

----------------------

Turbine:

Trim: 74.2

A/R: 0.63

Inducer: 64.8mm

Exducer: 55.8mm

----------------------

Turbine exhaust  outlet : 79mm

Turbine exhaust inlet：44.7mm/85.8mm

Compressor outlet：78 mm

Compressor inlet：51.5 mm

Feature

KEY FEATURES

-High Quality Material, Cast Housing with Durable Steel

-Boost Engine Horsepower Significantly

-Increase Engine Power and Torque Outpout; 

-Maintain Combustion Chamber Pressure and Fuel/Air Load

-Contructed with High Quality Material

-Built for Durability and Strength

OUR ADVANTAGE

1、100% BALANCING TEST，This Turbocharger you will receive has been balanced using the VSR machine technology. 

Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability.

2、All of the materials we use are the best materials,and we believe that only the best materials will guarantee the life of the turbo.

Turbine Wheel： the special K418 alloy to achieve stability under high temperatures up to 900 degrees Celsius,  and never use K13 Inconel alloy.

Turbine housing :Ductile iron QT450-10 can withstand temperatures up to 700 degrees Celsius

Aluminum blades :Precision machining forging. The lightweight design enables reduced noise and increased response without compromising comfort or longevity

*Factory direct price, ship worldwide; Offering any turbo part leading 2 years warranty under normal use, unlimited mileage.

Notice:

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage. 

* Make sure the oil drain line is lower than the turbo itself. 

* Gasoline car must install a water cooling device to avoid overheating. 

* Ensure exhaust outlet are well sealed by welding.

Note:

* Please check the specifications carefully before bidding. If you are not sure about these information, please feel free to contact us.

* This is universal application turbo, so modification might be required for some vehicles

* Professional installation is highly recommended (No Instruction Included)

*Additional parts will be needed for a complete installation. Please consult professional turbo installer for details.