TB4181+TB4161 433MHz PT2262 PT2272 EV1527 Encoder For Arduino Decoder RF Transmitter Receiver Link Kit

Category : Home Improvement | Electrical Equipment & Supplies

USD 13.26USD 13.96

TB418*1+TB416*1 433MHz PT2262 PT2272 EV1527 Encoder For Arduino Decoder RF Transmitter Receiver Link Kit

Description
Specification

Description

TB418*1+TB416*1 433MHz PT2262 PT2272 EV1527 Encoder For Arduino Decoder RF Transmitter Receiver Link KitKit No: RT382 433MHz

Receiver :

Demo :

Connect with ardiuno :

Model No.	TB417
Operating voltage	5.0VDC ±0.5V
Working priceple	Super Heterodyne receiver with decoder , learning type . decoding PT2262, PT2260, PT2240, EV1527 and other learning codeto chip or compatible chips, can learn and store 20 pcs different coded remote control. Intelligently distinguish shock resistance between fixed code and learning code , such as PT2262 and EV1527.
Static current	≤7 mA (DC 5V)
Operating frequency	433MHz
modulation Mode	ASK/OOK
Receiving sensitivity	over -110 dBm (50 Ω)
Speed	< 5 K bps (at 315 MHz, -95 dBm)
Operating temp.	-10 °C ~ +60 °C
Max rate	1 KHZ
Antenns length	20 cm (315 MHz), 18 cm (433.92 MHz)
Dimension	30*13mm
Output signal	TTL level , Momentary, Latch, Toggle ,user can set it by welding, Latch is defult.
Band width	2MHz(315MHz, Sensitivity go down 3dBm test )

Output

A.Momentary ----all disconnect (defult) ;

B. Toggle ---- connect T ;

C.Latch ---- connect L ;

1: This is a simple wireless remote control module, no additional instructions.2 : VT output high (5V TTL level) when signal received;3: D1 D2 D3 D4 four data pins corresponding to four buttons on the remote control, for example: when the A button on the remote control is pressed, D1 high output, etc.4: VT and D1-4 pins are 5V TTL pin 10MA maximum energy output current can drive the MCU port or LED lights .

Inter-locking (Latch): 4-way relay each other to switch, when relay A is working and locked , relay B C D corresponding to switch off; when B is working and locked , corresponding relay A C D swith off ; Only 1 relay is on among 4 relays A B C D;

Non-locking type (Momentary): Press A and hold it , then A is on.Same as Relay B C D ;

Self-lock type (Toggle): 4 chanels opens and closes independently, 4 chanels can work together ,they don't affect each other . press A button, A relay of work and locked, press again then disconnected; Same as B C D .

User guide :

1: Learing ID : Press learning button , LED is on and beginning to learn ;after learning , LED will flash for a while .Then LED will keep being on to learn the next remote. If perss the learned remoter controller , auto-quit learning within 10 seconds;

2: Delete ID : Keep pressing learning button for 5 seconds , LED will be on and enter deleting . LED off means finishing deleting;

3: Antenna with a soft wire or other hard metals (such as whip antenna), try to straighten. Do not go near metal objects;

4: Power supply voltage requires stable and low ripple factor, multi-level filtering (such as adding beads, inductors, capacitors, etc.);

Transmitter remotes:

Model No.	TB416 Encoder Transmitter
Function discription	Encoder Transmitter modules
Operating voltage	9V DC
Work current	>100mA
Operating frequency	433MHz
modulation Mode	ASK/OOK
SAW Frequency stability	±150kHz(max)
Transmitter power	>55mW
Data rate	≤10Kbps
Antenns length	24 cm (315 MHz), 18 cm (433.92 MHz)
Dimension	49318mm
Encodeing format	SC2262 fixing code (same as PT2264 PT2262) , Work with PT2272 decoder IC
Transmitter distance	1000Meter (open area)

Connect to MCU or Ardiuno :

Connect to Switch:

Specification

Switch Type : Remote Control

Origin : Mainland China

Brand Name : eletechsup

Model Number : TB418*1+TB416*1

Features : Remote

Item Type : Switches

TB418*1+TB416*1 433MHz PT2262 PT2272 EV1527 Encoder For Arduino Decoder RF Transmitter Receiver Link Kit

Description

Specification

RELATED PRODUCTS

TB4181+TB4161 433MHz PT2262 PT2272 EV1527 Encoder For Arduino Decoder RF Transmitter Receiver Link Kit