1.Working Voltage: AC110V  220V2.Current:Standby less than 10mA,Working less than 128mA3.Working Temperature: -10'C—+60'C4.Receiver Frequency: 315MHz/433.92MHZ5.Receiving Sensitivity: -105dB6.Output State: Switching Value7.Max Load:10A Relay, Resistive load less than 8A,Inductive load less than 3A8.Case Size:96* 80 * 29mmEncoding Type: Learning CodeAdd transmitter by the Learning Button on the receiverAbout Working way:

Working way changed by Learning button

Momentary: Press the Learning Button 1 times.

Relay: Press and hold -> On; Release -> Off.

Toggle: Press the Learning Button 2times.

Relay: Press -> On; Press same button again -> Off·

Latched:Press the Learning Button 3 times.

Relay: Press -> On; Press other button -> Off.

2channel Momentary+2channel Latched: Press the Learning Button 4 times.

2channel Momentary+2channel Toggle: Press the Learning Button 5 times.

2channel Toggle+2channel Latched: Press the Learning Button 6 times.

About Learning and clearing Method:

Learning: Press learning button, the indicator flashes and OFF, loosen finger, press any button of the remote transmitter, indicator flashes three times, meaning learning succeeds.(how many times press the learning button according to the working way you need)

Clearning: Hold press learning button about 8 seconds,indicator light flashes several times and off,then press remote ,Relay did not Respond ,it means clearning code successful.

Momentary-----Press the transmitter button A,the receiver relay A is ON; Release button A ,The receiver relay A is OFF ,The same as B/C/DToggle--------Press the transmitter button A For 1 time ,the receiver relay A is ON; Press button A again,The receiver relay A is OFF ,The same as B/C/DLatched------Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFFPress transmitter button B,the receiver relay B is ON,the relay A/C/D is OFFPress transmitter button C,the receiver relay C is ON,the relay A/B/D is OFFPress transmitter button D,the receiver relay D is ON,the relay A/B/C is OFFIt mean ,Latched only can keep 1CH ON,and it will ofen have 1CH is ONAbout Transmitter:

1.Buttons: 4 Buttons

2.Working Voltage: DC6V

3.Operating frequency :315/433MHz

4.Remote Distance: 10-100M

5.Operating Current: ≤12mA

6.Encode: EV1527 code

Note: 433mhz and 315 mhz are available ,433mhz will be sent out if there is no demand on frequency

1 x Transmitter(with battery)