Specifications:

Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.

1.Transmitter

2.Receiver

Working Voltage: AC220V

Working Frequency : 315MHz/433MHZ

Receiver sensitivity: :-107 dBm

Working temperature : -40‘C - 80’C

Decode: Learning Code

Control Type: Toggle, Momentary, Latched

working/output way:

Through the sub circuit board behind the pad Pin1

, Pin2, Pin3,Pin4,different local to switch working way

1,Momentary  1  2  3 4 no connection

2,Toggle          1+2  3+4  connection

3,Latched        1+2  connection ，3  4  no connection

4,Momentary+Toggle     1  2  no connection， 3+4  connection

1)Toggle/Self-Lock:   Press->On; Press again->Off

Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).

2)Latched/Inter-Lock:   Press->On; Press other button->Off

Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).

3)Momentary/Jog:   Press and hold->On; Release->Off

Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )

3.Learn code and Remove Code

Learn: input the 110V-220V to the receiver,press the learning button then the LED indicator ON.Then press key 1 and press key 2 on the transmitter.At last press the learning button again to finish learning.

Remove:keep pressing the learning button on the receiver about 8 seconds until the indicator turns off,it means the codes are cleared successfully.