Description

The Zigbee 3.0 Advantage :

The Zigbee 3.0 protocol is designed to communicate data through noisy RF environments that are common in commercial and industrial applications. Version 3.0 builds on the existing Zigbee standard but unifies the market-specific application profiles to allow all devices to be wirelessly connected in the same network, irrespective of their market designation and function.

Additionally, a Zigbee 3.0 certification scheme ensures the interoperability of products from different manufacturers. Connecting Zigbee 3.0 networks to the IP domain opens up monitoring and control from devices such as smartphones and tablets on a LAN or WAN, including the Internet, and brings the true Internet of Things to fruition.

Tuya smart APP, remote control

Soft way slow starting, Dimming range from 1%-100%

Protection: Over-load, Over voltage, Over-heat, Short circuit protection

Class 2 power supply, Full protection plastic housing

Suitable for indoor application for Zigbee home automation

Intelligent voice service with Tuya, Amazon Alexa, Google Assistant,Yandex Alice, etc.

 

Input voltage range: 100-240VAC

Frequency range：                      50/60Hz

Power factor： >0.9

Efficiency： 85%

Material： PBT

Wiring method: Terminal connection

Dimming range： 1-100%

Voltage output： 9V-40V

Current output options:                300mA, 250mA, 200mA, 150mA

Constant current precision: ±5%

No load voltage: 53V

Started delay time: <0.5S (230VAC，fullload)

Current ripple:                              ±5%

Operation temperature: -25 ~ +50℃

Tc/Enclosure Temp.: <75℃

PRI Wire preparation: 0.5-1.5²

SEC wire preparation: 0.5-1.5²

Dimensions: 131*30*20（mm）

RoHS: Complied with 2011/65/EU

Life time: 35,000 hours @Ta/Tc

Approved: CE CCC

Place of origin:                         Shenzhen China

 

Wiring instructions

All connections must be kept as short as possible to ensure good EMI behaviour

Mains leads should be kept apart from LED driver and other leads( ideally 5-10cm distance )

Advice the maximum length of output wires is 3 m

Secondary switching is not permitted(Except for constant voltage ).

Incorrect wiring can damage LED Modules.

The wiring must be protected against short circuits to earth (sharp edged metals parts, metal cable 

clips, louver, etc. )