Description

Parameter:

1.Weight: 5G

2.Packing list: Two elevated pieces, 3*16 screws*2

3.Brand manufacturers accessories, high quality

Applicable: TRAXXAS TRX-4 all models

Note:

It can be directly installed on the original front car shell pillar without opening holes.

Perfect installation and matching original factory location guide:

1. If the trx4 is installed in the original factory position, one side of the exhaust manifold will interfere with the motor wire clamp. It is recommended to remove the wire clamp for perfect installation and matching.

2. There is a slight interference in the trx4 installation of the V8 engine air intake. The shell pillar beam needs to be slightly cut with two unilateral notches. If you don't want to cut, just use DJ-0713 spacer products to raise the beam. Because the height of the car shell column can move up and down freely, it will not affect the fixed height of the car shell.

3. You can choose the upcoming radiator water tank kit, mechanical booster kit, DJC-0680 single head mushroom head, DJC-0681 double head mushroom head, DJC-0644 engine cover A, DJC-0645 engine cover B. The hood kit can be opened to further enhance the degree of simulation.

The perfect installation guide for investment:

Use the engine front kits on the market, so that there is no need for cutting or spacers, and the motor front is more simulated. We will soon release a kit for the front motor + simulation gearbox.

Installation Completion Display: